Synthetic Carbon Graphite Bushings Custom Graphite Parts OEM & ODM
Industrial Grade Corrosion Resistance Graphite Water Pump Bearing
Bearings are divided into rolling bearings and sliding bearings.
Graphite bearings are mostly used for sliding bearings. It is
applied to the bearings of conveyors, dryers, textile machines,
submersible pump motors in the food, beverage, textile, chemical
and other industrial sectors. The use of grease lubricants in these
parts will inevitably cause pollution, and the self-lubricating
properties of graphite bearings are very high. Strong,
corrosion-resistant, long-term operation without lubricating oil.
Feature:
1) High temperature resistance, strong electrical and thermal
conductivity.
2) Good lubricity, good chemical stability at room temperature,
resistance to acid, alkali and organic solvent corrosion.
3) Good plasticity and can be rolled into very thin flakes. Can
withstand drastic changes in temperature without damage.
Product Name | Industry | Application | Crucible,Boat,Dish,etc. | Metallurgy | Melting,refining and analysis | Dies,Molds,Ingot Chassis,etc. | EDM graphite electrodes,semiconductor manufacturing,iron,steel and
nonferrous metal making,continuous casting,metallurgy pressing
machine | Graphite Roller,etc. | Heat treatment of steel plate in furnace | Conduit,Skateboard,etc. | Aluminum molding | Graphite Pipe | Guard pipe for measuring temperature,blowpipe,etc | Graphite Block | Masonry furnace and other heat resistance material | Chemical Equipment | Chemistry | Heat exchanger,reaction tower,distillation columns,absorption
equipment,centrifugal pumps,etc | Electrolytic Plate | Salt solution and baking molten salt electrolyte | Electrolytic Mercury | NaCI electrolyte | Grounded Anode | Electrical anticorrosion | Motor Brush | Electricity | Commutator,slipping ring | Current Collector | Skate,slide,trolley | Contact | Switches,relays | Mercury Ferry And Electronic Pipe | Electronics | Anode,grid pole,repeller pole,ignition pole of the Mercury
rectifier and anode,grid electrode | Graphite Bearing | Machinery | High temperature resistance sliding bearing | Sealing Element | Sealing ring,stuffing box seal,packing seal | Product Element | Braking in plane and vehicle | Nuclear Graphite | Nuclear Power | Deceleration materials,reflective materials,shielding
materials,nuclear fuel,support devices,etc |
|
Material proformance
| Category | Model | Impregnant | Shore Hardess | Flexural Strength | Compressive Strength | Porosity | Bulk Density | Thermal expansion coeffcient | Temp. |
| ≥ | `X | ≥MPa | `X | ≥MPa | `X | ≤% | g/cm3 | 10-6/℃ | ℃ |
| Graphite | M120 | - | 60 | - | 25 | - | 81 | - | 18 | 1.6 | 4 | 350 |
| M154 | - | 40 | - | 20 | - | 40 | - | 28 | 1.42 | - | 350 |
| M254 | - | 10 | - | 25 | - | 45 | - | 25 | 1.65 | 3.4 | 450 |
| Impregnated resin carbon graphite | M106H | Epoxy resin | 75 | 90 | 51 | 60 | 180 | 190 | 1.0 | 1.62 | 4.8 | 200 |
| M238H | 40 | 55 | 39 | 50 | 78 | 110 | 1.0 | 1.85 | 4.5 | 250 |
| M255H | 40 | 50 | 34 | 45 | 78 | 90 | 1.0 | 1.8 | 4.5 | 200 |
| M106K | Furan resin | 80 | 95 | 55 | 65 | 200 | 210 | 2.0 | 1.62 | - | 200 |
| M120K | 75 | 95 | 50 | 60 | 190 | 195 | 2.0 | 1.7 | | 200 |
| M154K | 60 | | 35 | | 70 | | 6.0 | 1.6 | | 200 |
| M158K | 80 | 90 | 54 | 60 | 200 | 210 | 1.2 | 1.65 | - | 200 |
| Impregnated metal carbon graphite | M106D | Antimony alloy | 75 | - | 55 | 65 | 170 | 190 | 3 | 2.2 | 5.0 | 500 |
| M120D | 70 | - | 50 | 60 | 140 | 160 | 3 | 2.2 | 5.0 | 500 |
| M254D | 35 | - | 35 | - | 65 | - | 3 | 2.2 | 4.5 | 500 |
| M120P | Copper alloy | 65 | - | 65 | - | 200 | - | 3 | 2.4 | - | 400 |
| Impregnated glass carbon graphite | M106R | Glass | 110 | - | 75 | - | 210 | - | 1.5 | 1.9 | 4.67 | 600 |
| M120R | 95 | - | 57 | - | 190 | - | 1.5 | 1.9 | 4.67 | 600 |
| M254R | 65 | - | 55 | - | 100 | - | 1.5 | 1.9 | - | 600 |
| M262R | 75 | - | 48 | - | 138 | - | 1.5 | 1.9 | - | 600 |
FQA
Q1:Are you a manufacturing factory or a trading company?
A1: We are professional manufacturer for graphite products. we
supply various kinds of graphite products.
Q2: What's your MOQ?
A2: No limit to the quantity.
Q3: What's your lead time for production?
A3: The lead time for normal products is 25-30 days. it need to be
negotiated for special cases.
Q4: Can I have a sample order?
A4: Yes, we welcome sample order for checking quality, it will be free
for our stock sample, but the delivery charge will on your expense.
Q5: Do you have stock products to sell?
A5: No,We produce these products accorded to the customer’s
requirement,It also means material, density, shape,
size,design,quantity will depend on what your need.OEM orders
always be welcomed.
