Resin And Anitmony Carbon Graphite Bushings Reliable Supplier
Graphite bushings are commonly used in high-temperature and
high-load applications, where traditional lubricants may not be
effective or suitable. They can be found in a variety of
industries, including aerospace, automotive, and industrial
machinery. They are also used in applications where low noise and
vibration are important, such as in precision equipment and
instruments.
One of the advantages of using graphite bushings is their long
service life and low maintenance requirements. Graphite's
self-lubricating properties reduce the need for additional
lubrication, which can lead to cost savings and reduced downtime
for equipment maintenance. Additionally, graphite bushings can
operate in harsh environments, such as high temperatures and
corrosive atmospheres, without suffering from degradation or
failure.
Applications
| Product Name | Industry | Application | | Crucible,Boat,Dish,etc. | Metallurgy | Melting,refining and analysis | | Dies,Molds,Ingot Chassis,etc. | EDM graphite electrodes,semiconductor manufacturing,iron,steel and
nonferrous metal making,continuous casting,metallurgy pressing
machine | | Graphite Roller,etc. | Heat treatment of steel plate in furnace | | Conduit,Skateboard,etc. | Aluminum molding | | Graphite Pipe | Guard pipe for measuring temperature,blowpipe,etc | | Graphite Block | Masonry furnace and other heat resistance material | | Chemical Equipment | Chemistry | Heat exchanger,reaction tower,distillation columns,absorption
equipment,centrifugal pumps,etc | | Electrolytic Plate | Salt solution and baking molten salt electrolyte | | Electrolytic Mercury | NaCI electrolyte | | Grounded Anode | Electrical anticorrosion | | Motor Brush | Electricity | Commutator,slipping ring | | Current Collector | Skate,slide,trolley | | Contact | Switches,relays | | Mercury Ferry And Electronic Pipe | Electronics | Anode,grid pole,repeller pole,ignition pole of the Mercury
rectifier and anode,grid electrode | | Graphite Bearing | Machinery | High temperature resistance sliding bearing | | Sealing Element | Sealing ring,stuffing box seal,packing seal | | Product Element | Braking in plane and vehicle | | Nuclear Graphite | Nuclear Power | Deceleration materials,reflective materials,shielding
materials,nuclear fuel,support devices,etc |
|
Material proformance
| Category | Model | Impregnant | Shore Hardess | Flexural Strength | Compressive Strength | Porosity | Bulk Density | Thermal expansion coeffcient | Temp. |
| ≥ | `X | ≥MPa | `X | ≥MPa | `X | ≤% | g/cm3 | 10-6/℃ | ℃ |
| Graphite | M120 | - | 60 | - | 25 | - | 81 | - | 18 | 1.6 | 4 | 350 |
| M154 | - | 40 | - | 20 | - | 40 | - | 28 | 1.42 | - | 350 |
| M254 | - | 10 | - | 25 | - | 45 | - | 25 | 1.65 | 3.4 | 450 |
| Impregnated resin carbon graphite | M106H | Epoxy resin | 75 | 90 | 51 | 60 | 180 | 190 | 1.0 | 1.62 | 4.8 | 200 |
| M238H | 40 | 55 | 39 | 50 | 78 | 110 | 1.0 | 1.85 | 4.5 | 250 |
| M255H | 40 | 50 | 34 | 45 | 78 | 90 | 1.0 | 1.8 | 4.5 | 200 |
| M106K | Furan resin | 80 | 95 | 55 | 65 | 200 | 210 | 2.0 | 1.62 | - | 200 |
| M120K | 75 | 95 | 50 | 60 | 190 | 195 | 2.0 | 1.7 | | 200 |
| M154K | 60 | | 35 | | 70 | | 6.0 | 1.6 | | 200 |
| M158K | 80 | 90 | 54 | 60 | 200 | 210 | 1.2 | 1.65 | - | 200 |
| Impregnated metal carbon graphite | M106D | Antimony alloy | 75 | - | 55 | 65 | 170 | 190 | 3 | 2.2 | 5.0 | 500 |
| M120D | 70 | - | 50 | 60 | 140 | 160 | 3 | 2.2 | 5.0 | 500 |
| M254D | 35 | - | 35 | - | 65 | - | 3 | 2.2 | 4.5 | 500 |
| M120P | Copper alloy | 65 | - | 65 | - | 200 | - | 3 | 2.4 | - | 400 |
| Impregnated glass carbon graphite | M106R | Glass | 110 | - | 75 | - | 210 | - | 1.5 | 1.9 | 4.67 | 600 |
| M120R | 95 | - | 57 | - | 190 | - | 1.5 | 1.9 | 4.67 | 600 |
| M254R | 65 | - | 55 | - | 100 | - | 1.5 | 1.9 | - | 600 |
| M262R | 75 | - | 48 | - | 138 | - | 1.5 | 1.9 | - | 600 |
FQA
Q1:Are you a manufacturing factory or a trading company?
A1: We are professional manufacturer for graphite products. we
supply various kinds of graphite products.
Q2: What's your MOQ?
A2: No limit to the quantity.
Q3: What's your lead time for production?
A3: The lead time for normal products is 25-30 days. it need to be
negotiated for special cases.
Q4: Can I have a sample order?
A4: Yes, we welcome sample order for checking quality, it will be free
for our stock sample, but the delivery charge will on your expense.
Q5: Do you have stock products to sell?
A5: No,We produce these products accorded to the customer’s
requirement,It also means material, density, shape,
size,design,quantity will depend on what your need.OEM orders
always be welcomed.
