High quality Carbon Graphite Vanes for Vacuum Pump Pyrolytic
graphite Sheet
Skill of using carbon vane
1, When the new pump is in use, pay more attention to the steering
of motor and do not connect with reverse. The pump long time
reversal will lead to vanes damaged.
2, The use of pumps environment too much dust, air filtration is
not complete will accelerate the wear of the vanes, reduce the life
of the vanes.
3, Wet environment will cause the vanes and rotor slot wall
corrosion. When air pump start-up parts of the vanes can not be
thrown out, the vanes out of uneven stress damage. In such case to
check the vanes first and clean up.
4, The use of air pump, frequent switching will increase the number
of times the vanes thrown impact, reduce the life of the vanes,
should try to avoid.
5, Poor quality vanes will lead to air pump performance or damage
to inner wall of the cylinder, should be avoided.
Physical Properties of Graphite
| Category | Model | Impregnant | Shore Hardess | Flexural Strength | Compressive Strength | Porosity | Bulk Density | Thermal expansion coeffcient | Temp. |
| ≥ | `X | ≥MPa | `X | ≥MPa | `X | ≤% | g/cm3 | 10-6/℃ | ℃ |
| Graphite | M120 | - | 60 | - | 25 | - | 81 | - | 18 | 1.6 | 4 | 350 |
| M154 | - | 40 | - | 20 | - | 40 | - | 28 | 1.42 | - | 350 |
| M254 | - | 10 | - | 25 | - | 45 | - | 25 | 1.65 | 3.4 | 450 |
| Impregnated resin carbon graphite | M106H | Epoxy resin | 75 | 90 | 51 | 60 | 180 | 190 | 1.0 | 1.62 | 4.8 | 200 |
| M238H | 40 | 55 | 39 | 50 | 78 | 110 | 1.0 | 1.85 | 4.5 | 250 |
| M255H | 40 | 50 | 34 | 45 | 78 | 90 | 1.0 | 1.8 | 4.5 | 200 |
| M106K | Furan resin | 80 | 95 | 55 | 65 | 200 | 210 | 2.0 | 1.62 | - | 200 |
| M120K | 75 | 95 | 50 | 60 | 190 | 195 | 2.0 | 1.7 | | 200 |
| M154K | 60 | | 35 | | 70 | | 6.0 | 1.6 | | 200 |
| M158K | 80 | 90 | 54 | 60 | 200 | 210 | 1.2 | 1.65 | - | 200 |
| Impregnated metal carbon graphite | M106D | Antimony alloy | 75 | - | 55 | 65 | 170 | 190 | 3 | 2.2 | 5.0 | 500 |
| M120D | 70 | - | 50 | 60 | 140 | 160 | 3 | 2.2 | 5.0 | 500 |
| M254D | 35 | - | 35 | - | 65 | - | 3 | 2.2 | 4.5 | 500 |
| M120P | Copper alloy | 65 | - | 65 | - | 200 | - | 3 | 2.4 | - | 400 |
| Impregnated glass carbon graphite | M106R | Glass | 110 | - | 75 | - | 210 | - | 1.5 | 1.9 | 4.67 | 600 |
| M120R | 95 | - | 57 | - | 190 | - | 1.5 | 1.9 | 4.67 | 600 |
| M254R | 65 | - | 55 | - | 100 | - | 1.5 | 1.9 | - | 600 |
| M262R | 75 | - | 48 | - | 138 | - | 1.5 | 1.9 | - | 600 |
| Hot pressed graphite | M353 | - | 45 | - | 45 | - | 120 | - | 1.0 | 1.75 | - | 100 |
| M352 | - | 35 | - | 35 | - | 80 | - | 1.0 | 1.75 | - | 100 |
| M356 | - | 50 | - | 50 | - | 140 | - | 1.0 | 1.75 | - | 100 |
| M357 | - | 40 | - | 40 | - | 80 | - | 1.0 | 1.75 | 9.0 | 100 |
Photos of Product
Company Introduction
Sichuan Haicheng Carbon Products Co.,Ltd. Is a professional
enterprise engaged in research, design and production of electrical
carbon products,graphite products and mechanical seals.
We have nearly 200 employees, 55% of them have advanced degrees.
Among them there are 20 engineers and technicians, their 20% of the
total number of employees.
The company is equipped with more than 200 processing equipment and
testing equipment, such as CNC lathe,CNC automatic production
lines. CNC engraving and milling machines, CNC vertical milling
machines and etc. The production capacity is 2.2 million sets of
various types.
The company has a group of strong professional research and
development team, has professional testing equipment and testing
method, Carry out random inspection of incoming materials, and take
self-inspection, first inspection, patrol inspection, and random
inspection of products in the production process to ensure that the
products meet the qualified standards.
DELIVERY TIME:
15-20 days after confirming order,detail delivery date should be
decided according toproduction season and order quantity
FAQ
What is your MOQ?
There is no limit for MOQ.
When can i get the price?
We usually quote within 24 hours after getting your detailed
requirements,like size, quantity etc.
Do you provide samples?
Yes, samples are available for you to check our quality. it will on
your expense.
What about the lead time for mass product?
The lead time is based on the quantity, 25-30 days for regular
products.
What is your terms of delivery?
We accept FOB, CFR, CIF, EXW, etc. You can choose the most
convenient way for you.
What can you buy from us?
Carbon graphite bushings & bearings, seals, rods, plates,vanes.
